宋鹏程, 张春. PCIE3.0接口的SSD硬盘的FPGA实现[J]. 微电子学与计算机, 2017, 34(12): 63-66, 73.
引用本文: 宋鹏程, 张春. PCIE3.0接口的SSD硬盘的FPGA实现[J]. 微电子学与计算机, 2017, 34(12): 63-66, 73.
shu
SONG Peng-cheng, ZHANG Chun. Design of High-speed Solid State Drive in FPGA[J]. Microelectronics & Computer, 2017, 34(12): 63-66, 73.
Citation: SONG Peng-cheng, ZHANG Chun. Design of High-speed Solid State Drive in FPGA[J]. Microelectronics & Computer, 2017, 34(12): 63-66, 73.
shu

PCIE3.0接口的SSD硬盘的FPGA实现

Design of High-speed Solid State Drive in FPGA

    摘要
  • 摘要: 设计并实现了一个高性能固态盘的硬件原型系统.该固态盘以NAND闪存为存储介质, 满足ONFI4.0相关标准.与主机通过第三代PCIe总线接口进行通信.主控部分基于FPGA实现.在实现上, 采用了双总线结构, PCIE3.0接口并介绍了NAND闪存转换层的设计.

     

    Abstract: A high-performance solid state drive(SSD) is designed and implemented in the essay. NAND flash chip that obey the standard of ONFI4.0 is used as the storage meida in SSD. SSD communicate with the host through PCIE bus. The control part is implemented based on FPGA. A dual-bus structure and PCIE3.0 IP core are introduced. NAND flash translation layer(FTL) is also described in detail.

     

    • HTML全文
    • 参考文献(8)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回