赵东晓, 桑红石. 空域滤波算法硬件化设计[J]. 微电子学与计算机, 2014, 31(8): 20-24.
引用本文: 赵东晓, 桑红石. 空域滤波算法硬件化设计[J]. 微电子学与计算机, 2014, 31(8): 20-24.
ZHAO Dong-xiao, SANG Hong-shi. Hardware Design of Spatial Filtering Algorithm[J]. Microelectronics & Computer, 2014, 31(8): 20-24.
Citation: ZHAO Dong-xiao, SANG Hong-shi. Hardware Design of Spatial Filtering Algorithm[J]. Microelectronics & Computer, 2014, 31(8): 20-24.

空域滤波算法硬件化设计

Hardware Design of Spatial Filtering Algorithm

  • 摘要: 分析了目标识别图像底层预处理的几种常用算法,提出窗口空域滤波计算模型,并采用VerilogHDL语言设计了空域滤波类算法的实时实现硬件结构.该结构具有良好可配置性,用户可以根据自己的需求选择相应的滤波处理方法和计算参数.目前,已经完成了相关模块的结构设计、RTL代码编写、功能验证等数字IC前端设计流程.在SMIC.18μm CMOS工艺下完成了电路综合、形式验证,在120MHz时钟约束下得到运算模块面积约为1.9mm2,相当于114.2k个等效门,功耗为30mW.与公开发表的类似设计相比,我们的设计具有速率快、功耗低、可配置性强的优点.

     

    Abstract: In this paper,we analysis several bottom processing algorithms on target recongnition and propose spatial filtering calculation model,and implement a set of real-time hardware architecture for spatial filtering algorithms with VerilogHDL.The advantage of this structure is that it has a good configurability which can make users to choose proper filtering methods and calculated parameters according their needs.At present,we have completed digital IC front-end design process of the module,such as the structure design,RTL coding,function verification,etc.Simultaneously,we completed the work of Circuit synthesis and formality verification with Design Compiler Under the SMIC 0.18μm CMOS process,and obtained the area and power are 1.9mm2 equal to 114.2kGates,30 mW respectively at the frequency of 120 MHz.The design has fast speed,low-power,highly configurable advantages compared with the published similar designs.

     

/

返回文章
返回